25 Add fuel stabilizer to the gasoline (followingmanufacturer's instructions)Fuel stabilizer steps:a. Ensure gas tank is full.b. Add fuel stabilizer to fuel tank.c. Run pressure washer with highpressure hose at least 5 minutes afteradding stabilizer to allow it to enter thefuel system.d. Shut off engine2. Lubricate cylinder and piston:a. Disconnect spark plug wire and remove sparkplugb. Add one teaspoon oil through spark plug holec. Place rag over spark plug hole and slowly pullthe recoil a few times to lubricate thecombustion chamber.Replace spark plug, but do not reconnect the sparkplug wire.Prepare Pressure Washer for StoragePrepare the pressure washer for storage.1. Make sure the engine start switch is OFF.2. Disconnect the engine spark plug wire if you haven'talready done so.3. Disconnect the high-pressure hose, garden hose,and spray gun.Move Pressure Washer to Storage LocationLet engine cool for 5 minutes before moving thepressure washer to its storage location.