Storage34StorageWhen you are finished using the pressure washer, you must prepare the sprayer for storage and storeit in a proper location. Note:o If you will be storing the sprayer in freezing conditions, follow the instructions forpreparing the sprayer for storage in freezing conditions.o If you will not be using the sprayer again for 30 days or more, follow the instructions forpreparing the engine for long-term storage.WARNING• Fuel and its vapors can ignite and cause a fire. Select a well-ventilated storage areaaway from sources of heat, flame, or sparks.• A hot engine can ignite flammable materials. Always let engine cool at least fiveminutes before storing.Detailed instructions are provided below.Choose a storagelocationChoose a storage location that is:o Clean and dry.o Away from sources of heat, open flames, sparks, or pilot lights, evenif the pressure washer’s engine and burner fuel tanks are empty.Residual fuel fumes from tank can ignite.o Away from extreme high or low temperatures. Do not store thepressure washer in freezing conditions unless it is prepared asdirected below for those conditions.Perform regularmaintenancePerform periodic maintenance as directed in this manual to keep thepressure washer in safe working condition.Prepare pressurewasher for freezingconditions (ifneeded)If you will be storing the pressure washer in freezing temperatures, youmust properly prepare the pressure washer to prevent water fromfreezing in the system.CAUTION:Do not allow water to freeze in the pressure washer, high-pressure hose, or spray gun. Freezing water can cause damageto the equipment and cause the spray gun to fail in the openposition. A spray gun that has failed in the open position canwhip around and cause personal injury when the pressurewasher is started.