North Star NSLA1683066 Owner's Manual

North Star NSLA1683066 Owner's Manual Manual pdf 19 page image

Page 19 of 36⚠CAUTION• Risk of unsafe operation. Compressed air from the unit may contain water condensation and oilmist. Do not spray unfiltered air at an item that could be damaged by moisture. Some air toolsand accessories may require filtered air. Read the instructions for the air tools and accessories.Operating Instructions⚠WARNING• Risk of bursting. If any unusual noise or vibration is noticed, stop the compressor immediately andhave it checked by a trained service technician.How to Start1. Turn the Auto/Off switch to AUTO and allow the tank pressure to build. The motor will stop when thetank pressure reaches the “cut-out” pressure.2. Turn the regulator knob clockwise to increase pressure.IMPORTANT: When using the regulator and other accessories, refer to the manufacturer’s instructions.The compressor is ready for use.After Each Use⚠WARNING• Risk of unsafe operation. Firmly grasp air hose in hand when installing or disconnecting to preventhose whip.• Risk of bursting. Drain air tank daily. Water will condense in air tank. If not drained, water willcorrode and weaken the air tank causing a risk of air tank rupture.3. Move the Auto/Off switch to the OFF position. NOTE: If finished using compressor, follow steps 4-8.4. Turn the regulator knob counter-clockwise until fully closed. Ensure the regulated pressure gauge reads0 PSI.5. Remove the hose and accessory.6. Drain the air tank. See the Draining Air Tank section under Maintenance. Ensure the air tank pressuregauge reads 0 PSI.7. Allow the compressor to cool down.8. Wipe the air compressor clean with a clean, dry cloth and store in a safe, non-freezing area.