North Star NSR 17CS Installation And Operation Manual

Contents

North Star NSR 17CS Installation And Operation Manual Manual pdf 14 page image

1412 OR 24 HOUR CLOCKAll time displays are shown in 12 hour (AM/PM) clockformat at the default setting. If 24 hour clock formatis desired, follow steps below:1. Press the SET button and hold for three seconds,until the “Recharge Time” screen is displayed.2. Again, press the SET button and hold for threeseconds, until the model code screen is displayed.Customizing Features / Options3. Once in this display, press the SET button againand one of the two displays in Figure 33 is shown.4. Press the UP (È) or DOWN (–) buttons to selectthe time format.5. Press the SET button twice to return to the normaltime of day screen.GALLON OR LITER VOLUME UNITSAt the default setting, all water flow rate and usagedisplays are shown in gallons (GALS). Alternatively,you may select liters for volume units to display.1. Press the SET button and hold for three seconds,until the “Recharge Time” screen is displayed.2. Again, press the SET button and hold for threeseconds, until the model code screen is displayed.3. Once in this display, press the SET button twiceand one of the two displays in Figure 34 is shown.FIG. 34FIG. 32FIG. 334. Press the UP (È) or DOWN (–) buttons to selectthe volume units.5. Press the SET button once again to return to thenormal time of day screen.Questions? Call Toll Free 1-800-972-0135 or visit www.northstarwater.comWhen you call, please be prepared to provide the model and serial number,found on the rating decal, located on the rim below the salt lid hinges.