User Manual of Digital Video Recorder695.6 Configuring Redundant RecordingPurpose:Enabling redundant recording, which means saving the record files not only in the R/W HDD but also in theredundant HDD, will effectively enhance the data safety and reliability.Before you start:You must set the Storage mode in the HDD advanced settings to Group before you set the HDD property toRedundant. For detailed information, please refer to Chapter 10.4 Managing HDD Group. There should be atleast another HDD which is in Read/Write status.Steps:1. Enter HDD Information interface.Menu> HDDFigure 5. 23 HDD General2. Select the HDD and click to enter the Local HDD Settings interface.1) Set the HDD property to Redundant.Figure 5. 24 HDD General-Editing2) Click Apply to save the settings.3) Click OK to back to the upper level menu.3. Enter the Record setting interface.Menu> Record> Parameters1) Select the Record tab.
