NovaStar J6 User Manual

Also see for J6: User manual User manual User manual

Contents

J6 User Manualwww.novastar.tech 12as border color.4.3 Preset RecallSwitch presets. Apply the preset parameters directly. 16 presets in total are available forusers to set and use.4.4 Input SettingsInput resolution of signal sources including DVI and HDMI can be set. Preset resolutionsand custom resolution are available for users.Preset resolutions include: 1600×1200, 1680×1050, 1920×1080, 1920×1200.Preset refresh rates include: 50Hz, 59.9Hz, 60Hz, 75Hz, 120Hz.Custom resolution includes: custom width, custom height and custom refresh rate.Note:1) Select “Apply” and confirm the selection after the settings are done, and then the settings will takeeffect.2) Total pixels≤2.1 million, width of custom resolution cannot be greater than 3840 and height notgreater than 1080.4.5 Display ControlAs shown in the figure below, “OSD” can be turned on/off, and “Transition Effect”(including fade and cut), “Switching Time”, display state and image quality can be set inthe “Display Control” menu.Input Color Settings: Select an input source to be adjusted to adjust its brightness,contrast, saturation, hue or reset to defaults.