NovaStar J6 User Manual

Also see for J6: User manual User manual User manual

Contents

J6 User Manualwww.novastar.tech 175.2 SplicerStep 1: Refer to the hardware connection diagram to connect hardware devices.Step 2: Start V-Can, connect devices and adjust their parameters. Set system mode to“Splicer”.Step 3: Add windows in editing area and set window parameters. Then the edited contentis displayed on LED screen in real-time.Splicing area supports up to 2×2 layout. (Splicing mode can be chosen withoutlimitation).Different signal sources can be chosen. Windows (six at most) can be added. Windowparameters can be edited. Windows can be overlapped. The overlapped area displays thecontent of the window with higher priority.The display parameters set before can be saved as preset, which is convenient for usingnext time.