NovaTec S3 Installation Manual
                          | |
Contents
| 
Subject to change Page 14 of 26 Version 2.2 / Date: Sept 2013NovaTec Kommunikationstechnik GmbH E-Mail: info@novatec.de Phone: +49 (0)5251 1589-610Technologiepark 9 / DE-33100 Paderborn Internet: www.novatec.de Telefax: +49 (0)5251 1589-611of the system or stored.c. Systems with firmware version 00.07.00.55 or higher configured with NMP 6.5 or higher:A valid license key is already existent within the system and NMP 6.5 allows the upload of the con-figuration data without needing to upload license data first. The license key stays within the sys-tem. It is only deleted if overwritten with other license data or the flash is deleted (login with„nopassword“). A new license key is only needed if the firmware version is to be updated.Parallel to the dispatch of the S3 you will receive the license data via email. Store the license key well:Subsequent deliveries are with costs!General information to firmware upgrades:For updates onto bugfix firmware versions no new license is required in general. Bugfix versions only differfrom the original version by the last two characters.Example:Update from 00.06.07.00 onto 00.06.07.02:Update onto a bugfix version. No new license is required.Upgrade from 00.06.07.00 onto 00.07.00.55:Upgrade onto a firmware version with new features. A new license is necessary.In case of a downgrade or upgrade requirement, please contact our sales department. The available andapproved firmware versions as well as the associated release notes are to be found online underwww.novatec.de > Download.How to upload your license into the configuration is described under paragraph 7.6.3 Reset into default configurationIn case the system cannot be contacted after the configuration has been effected please press the resetbutton twice in succession. By doing so the S3 is reset into the default configuration: the IP configurationcorresponds with the factory set-up (see 6.1). Any password set afore is deleted. As such the login is car-ried out with user “Technik” and without any password (from FW version 00.07.02.00).7 ConfigurationThe S3 needs to be configured before installation. A PC with Microsoft Windows XP, Vista or NT is neces-sary. Download the PC tools from www.novatec.de > Download > NMP x.x.x. (Picture 8) |
Related manuals for NovaTec S3
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine