Novation SL MkII User Manual

Novation SL MkII User Manual Manual pdf 27 page image

27MIDI Clock Input - MClk-InMIDI Clock input source can be set to any of the following:AUTO – automatically selects the input port if there is MIDI Clock detected on that port. If there is not external MIDI Clockdetected the SL will revert to the Internal Clock.INTERNAL - the SL will use the Internal ClockEXT-AUTO - automatically selects the input port if there is MIDI Clock detected on that port. If there is not external MIDIClock detected the SL will revert to it’s internal Clock.Or any of the following options:MIDI-INUSB1USB2BPMPortThis sets whether or not ReWire BPM messages are sent to your computer when you use the TAP TEMPO button ormanually set the tempo from the Quick Menu.These messages are used for tempo control over your sequencer from the SL MkII but they will only have an effect whenthe Automap server software is running. This should be set to ‘OFF’ if you do not want to control the tempo in yoursequencer from the SL MkII using ReWire.Program Change Channel and Port Input - PRCGChan and PRCGPortThe SL can be set up so that Program change messages from an external device (or your computer) are used to changethe template on the SL. This can be useful in both Live and studio situations when switching between various set-ups.The SL will respond to Program change messages 1-32 for Advanced Mode templates 1-32 and a Program changemessage of 33 for Automap Mode.PRCGChan and PRCGPort define which MIDI channel and input port are to be used to receive these programchange messages.Global Zones Sub Menu - GlbZonesThis menu has the same options as the Zones settings in the Template edit menu, but is used to set zones globally ratherthan for a specific template. Please refer to page 22 for more details.Send and Receive Sub Menu - SendRcvTemplate, DumpThe first two options on this page allow you to dump templates in sysex format from the SL MkII to your computer oranother MIDI device for backing up. The first option allows you to dump a single template. Rotate the encoder to selectwhich template you want to dump (range is Current, 1-33), then press the button above the encoder to send the template.If you edit a template but do not save it, the edited version can be dumped by selecting ‘Current’ instead of the templatenumber. Selecting the template number will dump the version stored in the SL MkIIs flash memory (i.e. whether thetemplate has been saved or not). Press the button below ‘All’ to send all templates.