Offline Bulkload Utility 195novdocx (en) 11 July 20087.4.2 ACL TemplatesACLs that are specified in the ACL templates for an object class, are not automatically added forobjects bulkloaded using ldif2dib.7.4.3 OptionsOn Linux, if the -b option is used, the screen that displays statistics disappears after the bulkload iscomplete. The final statistics, however, are written to the log file for reference.7.4.4 Unsupported Platformsldif2dib is not supported on Netware for eDirectory 8.8.7.4.5 Simple Password LDIFOn Windows, while uploading LDIF having simple password, ldif2dib might fail if the NICI keys insystem and Administrator folder are not in sync. To work around this issue, access the keyspresent in the nici/system folder as follows:1 Go to the C:\Windows\system32\novell\nici\folder.2 Backup the files present in the Administrator folder.3 Get access to the system folder and its files by following the below mentioned steps:3a Go to the Security tab in the Properties window of the system folder.3b Select Advanced Options and go to Owner tab.3c Select Administrator.3d Go back to the Security tab and add Administrator to the list.Repeat the similar steps to get read access to all the files present inside the systemfolder.4 Overwrite the files in the Administrator folder with the ones in the system folder.5 Once the upload is done, copy the backed up files to the Administrator folder.6 Revert back the Administrator's access to the system folder and also the files within thefolder.7.4.6 Custom ClassesBulkloading an ldif with a large number of container objects using ldif2dib can result in a memorybuild up leading to a -150 error being reported.SYN_BACK_LINK SYN_TYPED_NAMESYN_HOLD SYN_TIME
