272 Novell eDirectory 8.8 Administration Guidenovdocx (en) 11 July 200811.4.5 Destroying the Selected ReplicaUse this operation to remove the selected replica from this server. The replica will be deleted orchanged to a subordinate reference.Do not use this option to perform the normal partition operations available in Novell iManager. Formore information, see Chapter 5, “Managing Partitions and Replicas,” on page 133.1 In Novell iManager, click the Roles and Tasks button Description: Roles and Tasks button .2 Click eDirectory Maintenance Utilities > Replica Repair.3 Specify the server containing the replica you want to destroy, then click Next.4 Specify a user name, password, and context to authenticate to the server, then click Next.5 Click Destroy the Selected Replica, then click Next.6 Specify the replica you want to destroy, then click Next.7 Follow the online instructions to complete the operation.11.5 Repairing Replica RingsRepairing a replica ring consists of checking the replica ring information on each server thatcontains a replica and validating remote ID information.Use the Replica Ring Repair Wizard to perform the following operations: “Repairing All Replica Rings” on page 272 “Repairing the Selected Replica Ring” on page 273 “Sending All Objects to Every Server in the Ring” on page 273 “Receiving All Objects from the Master to the Selected Replica” on page 273 “Removing This Server from the Replica Ring” on page 27411.5.1 Repairing All Replica RingsThis operation repairs the replica ring of all the replicas displayed in the replica view.If you have not performed a Local Database Repair operation on the local eDirectory databasewithin the last 30 minutes, you should do so before performing this operation. See “Performing aLocal Database Repair” on page 266 for more information.1 In Novell iManager, click the Roles and Tasks button Description: Roles and Tasks button .2 Click eDirectory Maintenance Utilities > Replica Ring Repair.3 Specify the server that will perform the operation, then click Next.4 Specify a user name, password, and context for the server where you will perform theoperation, then click Next.5 Click Repair All Replica Rings, then click Next.6 Follow the online instructions to complete the operation.
