NuTone ERLE1 Series Installation Use And Care Manual

Also see for ERLE1 Series: Installation use and care manual

INSTALLATION MANUALOPERATION6LIGHTING/LIGHT INTENSITY CHANGETo turn the lighting ON, touch the sensor corresponding to the desired lighting intensity and thesensor will illuminate.When the lighting is ON, touch the sensor corresponding to the active light intensity to turn thelighting OFF and memorize the intensity.The LED modules included with this hood are the latest in LED cooktop illumination technologyspecially designed to operate in the elevated temperatures of cooking - offering bright lighting andlasting up to 25 times as long as a standard bulb and greater reliability than typical replacementLED bulbs.FILTER CLEANING REMINDERWhen it is time to clean the filters, the Filter Cleaning Reminder sensor will blink for 30 secondsafter the blower is turned off.To reset the Filter Cleaning Reminder, touch and hold for 3 seconds this sensor while it is blinking.ADDITIONAL INFORMATIONThis control is light-sensitive; pointing directional spot lights towards it may cause it to malfunction.In rare circumstances, the control could falsely be activated by an external light source.