NuTone Premier NP50000 Series Instruction Manual

Contents

NuTone Premier NP50000 Series Instruction Manual Manual pdf 10 page image

10OPERATIONControlsThe hood is operated using the slide controlsunder the bottom of the hood.The light switch turns the lamps on and off.The blower switch: makes it possible toselect the motor operating speed.Position 0: motor off.The pilot lamp lights up whenever the bloweris on.HEAT SENTRY™Your hood is equipped with a HEATSENTRY™ thermostat. This thermostat is adevice that will turn on or speed up the blowerif it senses excessive heat abovethe cooking surface.1) If blower is OFF - it turns blower ON toHIGH speed.2) If blower is ON at a lower speed setting -it turns blower up to HIGH speed.When the temperature level drops to normal,the blower will return to its original setting.WARNINGThe HEAT SENTRY thermostat can startthe blower even if the hood is turned OFF.When this occurs, it is impossible to turnthe blower OFF with its switch. If you muststop the blower, do it from the mainelectrical panel.LIGHT BULBSThis range hood requires two 40-Watt lightbulbs (included).ALWAYS SWITCH OFF THE ELECTRICITYSUPPLY BEFORE CARRYING OUT ANYOPERATIONS ON THE APPLIANCE.To change bulbs:1. Remove the screw securing the light fitting.2. Pull down lens to remove.3. Replace with light bulbs of the same type.CAUTION: BULB MAY BE HOT!fig.14LIGHTSWITCH PILOTLAMPBLOWERSWITCH0 1 0 1 2 3 4fig.15fig.16