NuTone Premier NP50000 Series Instruction Manual

Contents

NuTone Premier NP50000 Series Instruction Manual Manual pdf 8 page image

8PREPARE THE HOODNON - DUCTED CONFIGURATION, cont’d.8. Carefully place the lower decorative flueinto the recessed area of the range hoodtop. Fig.79. Carefully slide the upper decorative fluedown inside the lower flue.Note: air vents must be up. Fig.710.Secure the recirculation plenum to theupper flue with (4) flat head screws. Fig.9PLENUM4 FLATHEADSCREWS(3.4x15 mm)UPPERFLUEfig.9fig.10RECTANGULARCUTOUTHEIGHTADJUSTMENTSCREWS(3.9x9.5mm)WALL FRAMINGMOUNTINGBRACKETINSTALL THE HOODNote: at least two people will be required tomount the hood.1. Raise the hood into itsmounting position.2. Plug the power cord intothe electric wall recep-tacle. Tuck excess cordbehind the flue.3. Align the rectangularopening on the back ofthe hood with the wall-mounting bracket. Gentlylower the hood until itsecurely engages thebracket. Fig.104. Level the hood.Height adjustment screws providevertical adjustment.Secure the hood with mounting screws(4.8x38mm). Use drywall anchors,provided, if wall studs or framing are notavailable.Secure with (2) mounting screws(4.8x38mm). Use drywall anchors providedif wall studs or framing are not available.Fig.105. Raise the upper flue until its holes alignwith holes in the flue mounting bracket(located on ceiling). Fig.116. Secure the flue with (2) mounting screws(3.9x9.5mm). Fig.11 fig.11FASTEN FLUE TOUPPER BRACKETWITH SCREWS (3.9x9.5mm)MOUNTINGSCREWS(4.8x38mm)MOUNTINGSCREWS(4.8x38mm)