NuTone Premier NP51000 Series Instruction Manual

Contents

NuTone Premier NP51000 Series Instruction Manual Manual pdf 6 page image

- 6 -INSTALL MOUNTINGBRACKET1. Construct wood wall framing that is flushwith interior surface of wall studs.Make sure:a) the framing is centered overinstallation location.b) the height of the framing will allow themounting bracket to be secured tothe framing within the dimensionsshown.2. After wall surface is finished, secure mount-ing bracket to framing using dimensionsshown.NOTE:- On 8’ ceilings, the hood distance abovecook top is :minimum 24”, maximum 30” (for DuctedConfiguration).minimum 24”, maximum 28” (for Non-Ducted Configuration).- On 9’ ceilings, the hood distance abovecook top is :minimum 26”, maximum 30” (the air ventson the upper flue will be exposed afterinstallation).FRAMING BEHIND DRYWALL38-1/16"= bottom of hood 24"above cooktop44-1/16"= bottom of hood 30"above cooktop38-1/16” to 44-1/16”above cooktopINSTALL FLUE MOUNTINGBRACKETDUCTED AND NON-DUCTED1. Assemble the flue mounting bracket,adjusting outside width as shown. Fig.42. Carefully center the mounting bracketdirectly over the range hood location.3. Secure the bracket assembly to the ceilingusing (2) 4.8x38mm mounting screwsand drywall anchors. Make sure thebracket is pushed into the corner, tightagainst the wall and centered over thehood.FLUE MOUNTINGBRACKET9 13/16”(249.8mm)FIG. 43.9 x 5.7mmFLAT HEADBRACKET SCREWS