Gb - 24CODING PROCEDURE FOR THE 1ST USE1. Activate the remote control: press for 1 second the On/Off red button ((( ) located on the side of theremote control.2. Activate the receiver collar: approach the area where the On/Off switch magnet is located in theremote control until coming in contact on red indicator located on the receiver collar, hold for 1second.3. Move the remote control away from the receiver collar.4. Press the button of the remote control. A beep sound is emitted, the collar is then synchronizedwith your remote control.RE-CODING PROCEDURE (for all codings other than the 1st)1. Activate the remote control: press for 1 second the On/Off red button ((( ) located on the side of theremote control.2. Receiver collar in position « deactivate » (indicator off): approach the area where the On/Off switchmagnet is located in the remote control until coming in contact on red indicator located on the receivercollar, hold for 6 seconds. The indicator lights in fixed green, then flashes in red.3. Move the remote control away from the receiver collar.4. Press the button of the remote control. A beep sound is emitted, the collar is then synchronizedwith your remote control.Reprogram a receiver collarReceiver can be re-coded indefinitely, either with the same remote control, or with a new CANICOMremote control.Ref. § Re-coding procedure. How to use the remote controlThe CANICOM 300 remote control is designed to operate with 1 receiver collar. button: beeperIf you press the « Beeper » button the receiver collar will emit sound signals. There is no time limit forthis function: the beeper will continue to sound for as long as the button is pressed.A « transmission » symbol will appear on the LCD screen of the remote control; the indicator light on thecollar goes from flashing green to permanent green for as long as the button is pressed.It’s up to you to use the beeper depending on the way you want to train your dog. With the beeper buttonyou can:- send a sound to your dog when it is disobedient,- draw its attention,…It’s very important to always use the beeper button in the same way in order not to disturb your dog.