Nuova Simonelli Appia User Handbook Manual

Also see for Appia: User handbook User handbook User handbook

Nuova Simonelli Appia User Handbook Manual Manual pdf 43 page image

RAMMING Appia VAMMINGming units, proceed ascan be carried out withn.ming function for eachry to hold down the con-or 5 secondsill begin to flash.ramming mode for thebles the setting mode forating parameters.AMMING COF-SESount of water for each ofeed as follows:ith the right amount ofr single filter holder canto the key to be pro-r in the group.livery keys:egin to dispense anduantity has been delive-nued key . .• Delivery will cease and the selected dosekey will switch off (the other keys will conti-nue to flash).• Press the continued key to exitthe programming function or to continueprogramming other dose keysNOTE: This procedure can be used for allgroups on the machine, although itmust be performed on one group at atime; the other groups will continue tooperate as normal.7.3 PROGRAMMING HOTWATER• Use the relevant procedure to enter the pro-gramming function.• Press the hot water selection key .• Hot water delivery will begin.• Decide the required amount of hot waterand then press the key again• Press the continued key to exitthe programming function or to continueprogramming other selection keys.7.4 PROGRAMMING THECUP WARMER (optio-nal)• Enter the programming mode for the firstgroup following the usual procedure.• Press the cup warmer select key .• The delivery buttons for the first and secondgroup will respectively show the automaticswitch on and off times, while the continuouskeys for the first and second groupwill flash.As shown in the table, each of the deliverykeys has an associated value; the switch ontime for the cup warmer is given by sum-ming the values for the lit keys of the firstgroup. The same calculation method isused for the switch off time of the cup war-mer, using the keys of the second group.Key Group 1(on time)Group 2(off time)2 min.4 min.8 min.16 min.5 min.10 min.20 min.40 min.-04-2006 11:36 Pagina 38