Nuvo Concerto NV-I8GMS Installation Manual

Also see for Cocerto NV-I8GXS: Installation guide Quick start guide Brochure & specs

Nuvo Concerto NV-I8GMS Installation Manual Manual pdf 27 page image

25Lock Zone: This temporarily locks the zone on thecurrent source selection. It requires a four digit securitycode that must be set in the Settings Tab of theConfigurator Software. The security code is entered onthe Control Pad by using the up and down arrows toscroll to the first number and pressing OK. The displaywill then highlight the next number. Using the processdescribed above, set the second, third and fourthnumbers. Once the fourth number is set, the zone willremain locked until the security code is entered tounlock it, fig. 39.Lock Zone & Off: This temporary lock works very muchlike Lock Zone, but is used to turn the zone off andrequires the security code to turn the zone back on.Lock Code? (5)4300Fig. 39Fig. 40Setup: The Setup menu is for specific system setup. Itconsists of several subset menus, Fig. 40. These are definedin the next section.Favorites #1-12: Twelve global favorites can be definedfor easy access from within the Main Menu or from thetwelve numeric favorites from the Grand Concertoremote control. Any favorites, which include M3 andiPod play lists, tuner presets and specific disc selectionscan be selected in the Favorites setup and automaticallyadded to the global list. The Grand Concerto RemoteControl has a 12-button numeric Control Pad thatprovides direct access to the 12 assigned favorites.When a favorite is selected, the zone will automaticallygo to the appropriate source and music selection, Fig.41.SetupFavorites #1-12Zone SettingsSystem Settings*Source SettingsFavorites #1-12RockJazzSports Talk(Empty)Fig. 41Fig. 42(Empty)(Empty)(Empty)Zone Settings: This selection contains several zone specificcontrols, Fig. 42. Note that Advanced is grayed out and ispreceded by an asterisk. This is an installer specific levelthat is accessed by holding the OK button for six seconds.Zone SettingsBalanceBassTrebleLoudness Comp.Volume SettingsDisplay Settings*AdvancedNote that the security code is set in System Settings tab