Nuvo NV-P100 Series Product Manual

Also see for NVGW100 series: Product manual Product manual Manual

Contents

Nuvo NV-P100 Series Product Manual Manual pdf 34 page image

NUVO®Select the Zone that the keypad is to be associated with. (Fig.96)If the connection is successful “Keypad added” will be dis-played, and it will show the associated zone. (Fig. 97)Fig. 96If no other keypads are to be added, select “Done” to returnto the Settings screen. If all keypads have been added, re-turn to the home screen. (Fig. 98)NOTE: Up to four keypads can be assigned to a single zone.This is useful in hallways and rooms with multiple entranc-es.Fig. 97Fig. 981. This only applies to players that are capable of being wireless. Rackmount players do not have the wireless option.2. To change a wireless-cabable player, follow the steps in section 2.1, if NOT using a Nuvo GW-100-xx Gateway, or in sec-tion 2.2 if using a Nuvo GW-100 Gateway.3. Once this has been completed, remove the Ethernet connection.2.7 Making an existing Ethernet connected zone wirelessUp to two additional Gateways can be added to a system when additional Wi-Fi range is needed. Additional Gateways mustbe hardwired to the network along with the original Gateway. This can be done by plugging the new Gateway(s) into thefirst Gateway, into the installation’s router, or a switch from the router. When a new Gateway is connected to the system itis added automatically. A notification will display on the screen noting that a Gateway has been added.To confirm that the Gateway has been added, you can also go to Settings/Gateways for a list of connected Gateways.2.8 Adding Additional Nuvo NV-GW100-xx Gateways to an Existing System34