InstallationPage 3-43-2 Jumper SettingsJCMOS:Settings:1-2: Normal (Default)2-3: Clear CMOSClear CMOS data JumperIf the CMOS data becomes corrupted oryou forgot the supervisor or userpassword, clear the CMOS data toreconfigure the system back to thedefault values stored in the ROM BIOS.To CMOS Clear data, please follow the steps below.1. Turn off the system.2. Change the jumper from “1-2” to “2-3” position fora few seconds.3. Replace the jumper back to the “1-2” position.4. Turn on the system and hold down the keyto enter BIOS setup.
