InstallationPage 3-5NOTES:•Using non-compliant memory with higher bus speeds (overclocking)may severely compromise the integrity of the system.3-3 System Memory ConfigurationMemory LayoutThe mainboard accommodates two PC2100/PC2700/PC3200 184-pin DIMMs (DualIn-line Memory Modules):•Supports up to 2.0GB of 266/333/400MHz DDR SDRAM.•Supports unbuffered DIMM configurations defined in JEDEC DDR DIMMspecification.DDR DIMM 1DDR DIMM 2oNtolSMMID1sMMID21#MMIDSS/SDSS/SD2#MMIDSS/SDSS/SDMemory configurations supported:* DS - Double-sided DIMM, * SS - Single-sided DIMMTo install, align the notch on the DIMM module with the connector.Press straight down as shown in the figure below until the white clipsclose and the module fits tightly into the DIMM socket.Memory Installation :Notch