Nvidia ConnectX-5 User Manual

36d. Case A: If the installation script has performed a firmware update on your networkadapter, you need to either restart the driver or reboot your system before thefirmware update can take effect. Refer to the table below to find the appropriateaction for your specific card.Action \ Adapter Driver Restart Standard Reboot(Soft Reset)Cold Reboot (HardReset)Standard ConnectX-4/ConnectX-4 Lx or higher- + -Adapters with Multi-Host Support- - +Socket Direct Cards - - +Case B: If the installations script has not performed a firmware upgrade on yournetwork adapter, restart the driver by running: “/etc/init.d/openibd restart”.In case your machine has the latest firmware, no firmware update will occurand the installation script will print at the end of installation a messagesimilar to the following:Device #1:----------Device Type: ConnectX-XPart Number: MCXXXX-XXXPSID: MT_PCI Device Name: 0b:00.0Base MAC: 0000e41d2d5cf810Versions: Current AvailableFW XX.XX.XXXXStatus: Up to dateIn case your machine has an unsupported network adapter device, no firmwareupdate will occur and one of the error messages below will be printed. Pleasecontact your hardware vendor for help with firmware updates.Error message #1:Device #1:----------Device Type: ConnectX-XPart Number: MCXXXX-XXXPSID: MT_PCI Device Name: 0b:00.0Base MAC: 0000e41d2d5cf810Versions: Current AvailableFW XX.XX.XXXXStatus: No matching image foundError message #2:The firmware for this device is not distributed inside NVIDIA driver:0000:01:00.0 (PSID: IBM2150110033)To obtain firmware for this device, please contact your HW vendor.