Nxg NX-RF200 Installation Manual
                | |
Features and BenefitsInterference Rejection and Extended Range via Narrow BandThe NX-RF200 receives RF (radio frequency) signals via its integrated RFreceiver and antenna. The NX-RF200 displays RF interference via a brightred Status LED, which flickers when interference is present if the ID is setto 0. Simply relocate the NX-RF200 should interference occur.Two Fixed IR OutputsThe NX-RF200 is equipped with two fixed IR line outputs with standard 3.5jacks for standard IR emitter/flashers.Two Variable IR Outputs Match Rear Panel IR InputsThe NX-RF200 is equipped with two adjustable IR line outputs. Each outputcan be individually matched to rear panel IR inputs on any component thatis designed to be operated by a standard IR repeater. The outputs utilize a3.5mm jack and are compatible with standard IR emitter/flashers as well.Up To Fifteen Equipment Locations With Identical ComponentsEach NX-RM remote is “addressable.” They can be programmed to specifi-cally control components in a particular room by installing an NX-RF200base station at each location. In operation it’s simple: when you select adevice located in the Den, the NX-RM remote only sends commands to theDen. When you select a device located in the Family Room, the NX-RMremote only sends commands to it.A Single NX-RF200 Can Control an Array of Identical Componentsor Identical Zones of a Multi Zone Preamp/Matrix SwitcherEach NX-RF200 has four “addressable” IR Line Outputs. For example, youcan control up to four identical TV’s with one NX-RF200 or route volumecommands for a specific zone to a particular zone IR input on a multi-zonepreamp. If you have more than four identical components or zones, up to15 additional NX-RF200s can be installed to control them (thus allowing upto 60 identical components or zones in one house).Parts GuideThe NX-RF200 RF Base Station includes:1 - NX-RF200 Base Station1 - Mounting Plate for wallmounting the NX-RF2004 - Screws for wall mounting1 - 9V-300mA Power SupplyNX-RF200 Base Station24 - Visible Flashers with 10 foot plug in cables4 - Visible Flashers with 10 foot plug in cables4 - Extra self adhesive pads for Emitters12 - Labels for IR Line Outputs1 - Screwdriver for Variable OutputsNX-RF200_Manual.qxd 10/27/08 12:48 PM Page 5 |
Related manuals for Nxg NX-RF200
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine