Nxg PRO 6820 User Manual
    | |
Contents | 
New Construction1. Determine speaker locations and mark them onyour plans for future reference.2. If possible, run speaker wires after HVAC andelectrical wiring is in place.3. Secure speaker wires in place along the runwith insulated staples only and be careful not topierce the wire’s insulation. Allow a bit of slack forexpansion of building materials.4. Needless to say, the actual speakers should notbe installed until the wall board is in place. In themeantime, leave several feet of wire coiled up andsecured at the back side of the mounting hole.5. To complete installation follow steps 2 through8 above.FIG. 7Operational CheckAfter making all connections, it’s a good idea tomake sure everything is working properly. Turnon your surround or stereo system, making surethe volume control is turned down and that thebalance control is in the center position. Activatea musical or movie source such as FM, a CD orDVD player. Gently turn up the volume, youshould hear sound coming from your new NXGspeakers. If no sound is heard from any or allspeakers, switch off the system immediately andcheck for open or loose connections, wrongpolarity or shorts, proper transformer tap selectorswitch setting, or proper source selection.NX-PRO6820CE SpecificationsMaximum Power Handling: 5 - 120 watts[40 watts (transformer limited) in 70 volt mode]Sensitivity: 90dB @ 1 watt/1 meterFrequency Response: 40 Hz-22,000 HzDriver Complement:6.5˝ (165mm) metallic anodized injection-molded radiative cone wooferw/rubber surround1˝ (25mm) metallic anodized liquid-cooled dome tweeter w/minimun diffractiontilt-swivel islandTransformer Tap Settings: 2W, 5W, 10W, 20W, and 40W (for 70 volt systems)Plus standard 8 ohm setting (for conventional audio systems)Nominal Impedance: 8 ohmsGrille: Corrosion-resistant powder coated aluminumOverall Dimensions: 11˝ (diameter) round x 7˝ DRequired Ceiling Cutout: 93/4˝ (diameter) roundNXG Speakers Three-Year Limited WarrantyIf the NXG speaker system proves to be defective in workmanship or materials with-in three years from the date of the original customer’s purchase, we will, at our option,repair or replace the defective product.Limitation of Implied WarrantiesAny implied warranties, including warranties of merchantability and fitness for aparticular purpose, are limited in duration to the length of this warranty.Exclusion of Certain DamagesNXG’s liability for any defective product is limited to repair or replacement of theproduct at our option. NXG shall not be liable for incidental or consequential dam-ages of any kind or character because of product defects. Some states do not allowlimitations on how long an implied warranty lasts and/or do not allow the exclusionor limitation of incidental or consequential damages, so the above limitations andexclusions may not apply.This Warranty Does Not Cover:• Damage caused by abuse, accident, misuse, negligence, or improper operation.• Any product whose serial number has been altered, defaced, or removed.• Products that have been altered or modified.• Normal wear and maintenance.• Damages caused by shipping. (All claims for shipping damage must be made withthe carrier.)Warranty ServiceWarranty service must be performed by an authorized service center, usually an NXGspeaker systems dealer or its authorized agent. You may obtain a list of authorizedservice centers by contacting NXG. All warranty repairs must be accompanied by theoriginal bill of sales. No other document is acceptable or is required. This warrantygives you specific legal rights, and you may also have other rights which vary fromstate to state.NXG reserves the right to revise speaker system specifications without notice.16648 North 94th Street • Scottsdale, AZ 852601-800-733-0008 www.nxgtech.comInputConnectorsSecurityLoop |
Related manuals for Nxg NX-PRO6820CE
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine