- 21 -You can select from among the following items and parameters.Text Size: Auto, Small, Standard, LargeText Type: Auto, Style1, Style2, Style3, Style4, Style5, Style6, Style7Text Edge: Auto, None, Raised, Depressed, Uniform, Left Shadow, Right ShadowText Color: Auto, Black, White, Red, Green, Blue, Yellow, Magenta, CyanText Opacity: Auto, Solid, Transparent, Translucent, FlashingBackground Color: Auto, Black, White, Red, Green, Blue, Yellow, Magenta, CyanBackground Opacity: Auto, Solid, Transparent, Translucent, FlashingNote:• You cannot set both “Text Color” and “Background Color” as a same color.• You cannot set both “Text Opacity” and “Background opacity” to “Transparent”.SETTING THE PICTURE SIZEYou can view 480i and 480p format programs in a variety of picture sizes— Natural, Cinema Wide1,Cinema Wide2, Cinema Wide 3, Full and Native.Selecting the picture size1. Select “Picture”, then press or ENTER.2. Press ▲ or ▼ to select “Picture Size”, then press or ENTER to displayPicture Size menu. Press ▲/▼ or corresponding Number buttons (0-4) toselect the desired picture size, as described below.Note:• Selectable picture sizes may vary depending on the input source or broadcast signal.• Picture Size menu also can be displayed by pressing PICTURE SIZE on the remote control.Note:• Some High Definition and/or Digital broadcasts may not allow you to change the picture size.• In HDMI or COMPONENT mode with a scanning rate of 720p, 1080i or 1080p (HDMI only) onlythe Cinema Wide2 and Full picture size feature is available.• In PC Mode, only the Natural, Full and Native picture size features are available. In PC Mode(WXGA), only the Full and Native picture size features are available.NaturalIn some cases, this image will display the size ofstandard 4:3 with a black side bar.Cinema Wide1 (for 4:3 formatprograms)To fill the screen, the right and left edges areextended, however; the center of the pictureremains near its former ratio. The top and bottomedges of the picture may be hidden.Cinema Wide2 (for letter boxprograms)The entire picture is uniformly enlarged—it isstretched the same amount both wider and taller(retains its original proportion). The top and bottomedges of the picture may be hidden.Cinema Wide3 (for letter box programswith subtitles)To fill the width of the screen, it is extendedhorizontally. However; it is only slightly extended atthe top and the bottom. The top and bottom edgesof the picture may be hidden.Full (for 16:9 source programs)Full will display the picture at the maximum size.Native (for PC mode only)Detects the resolution of the signal of the imageand it will be shown on the screen with sameamount of pixels.