Nytech DC-8200 Introduction12 - EnglishInserting an SD CardBy using the supplied SD memory card you can increase the Nytech DC-8200 storage capacity for saving your photos, videos and voice recordings.When the memory card is inserted, all the photos and videos you take willbe saved onto it. If there is no memory card inserted, your photos andvideos will be saved to the internal memory of the camera.! Power off the camera using the On/Off switch [2] before youinsert or remove a memory card.- Open the Nytech DC-8200 battery compartment bypushing the cover gently outwards. The cover will openup by a spring mechanism.- Insert the memory card withthe contacts towards therear of the camera into thecard compartment and pushit into the housing. Thememory card clicks intoplace.- Close the battery compartmentcover by pressing down the flap on the housingof the camera and then by pushing it inwards till it locks.The cover clicks into place.- To remove the memory card, open the battery compartment cover andgently press on the inserted card. This will protrude a little so that youcan get a hold of it and remove it.! If the memory card or the internal memory is exhausted, themessage Memory full will appear on the display [12].