Nytech DC-8200 User Manual And Service Information

Contents

Nytech DC-8200 User Manual And Service Information Manual pdf 35 page image

Nytech DC-8200 Capturing PicturesEnglish - 29Drive ModeThe functions in the Drive Mode menu allow you to programme the self-timer or to enable the burst capture. The corresponding icon from the tablewill be displayed on the LCD (see page 16 – item 4). The following settingsare available:Option Icon DescriptionOff Normal single shot without any further modes.2 sec. Captures the photo with a 2-second delay afterpressing the shutter button [3]. During the delaythe self-timer indicator [14] will blink and thecamera generates an acoustic signal.10 sec. Captures the photo with a 10-second delay afterpressing the shutter button [3]. During the delaythe self-timer indicator [14] will blink and thecamera generates an acoustic signal.Double Captures the photo with a 10-second delay afterpressing the shutter button [3], plus a secondphoto after a few seconds. During the delaysthe self-timer indicator [14] will blink and thecamera generates an acoustic signal.Burst After enabling this function you can capture apicture sequence. The camera will shoot onepicture per second while you keep the shutterbutton [3] pressed. A shutter sound will begenerated for each shot.i These functions are available only if you have set the AutomaticExposure Bracketing (AEB) function (see next page) to Off.