OHAUS 3000 Series Instruction Manual

Also see for Ranger 3000 Series: Instruction manual Instruction manual Service manual Quick start guide Instruction manual

OHAUS 3000 Series Instruction Manual Manual pdf 41 page image

EN-40 3000 Series Indicators8.4 ComplianceComplianceCompliance to the following standards is indicated by the corresponding mark on the product.Marking StandardThis product conforms to the EMC directive 2004/108/EC, the Low Voltage Directive 2006/95/EC and theNon-automatic Weighing Instruments Directive 90/384/EEC. The complete Declaration of Conformity isavailable from Ohaus Corporation.AS/NZS4251.1 Emission, AS/NZS4252.1 ImmunityUL60950-1: 2003EC Emissions NoteThis device complies with EN55011/CISPR 11 Class B Group 1.Important notice for verified weighing instrumentsWeighing Instruments verified at the place of manufacture bear one of the preceding mark on the packinglabel and the green ‘M’ (metrology) sticker on the descriptive plate. They may be put into service immediately.Weighing Instruments to be verified in two stages have no green ‘M’ (metrology) on the descriptive plate andbear one of the preceding identification mark on the packing label. The second stage of the initial verificationmust be carried out by the approved service organization of the authorized representative within the EC or bythe national weight & measures (W+M) authorities.The first stage of the initial verification has been carried out at the manufacturers work. It comprises all testsaccording to the adopted European standard EN 45501:1992, paragraph 8.2.2.If national regulations limit the validity period of the verification, the user of the weighing instrument muststrictly observe the re-verification period and inform the respective W+M authorities.www. GlobalTestSupply .comFind Quality Products Online at: sales@GlobalTestSupply.com

/ 43

Related manuals for OHAUS Ranger 3000 Series