OHAUS EB SERIES Service Manual

Contents

OHAUS EB SERIES Service Manual Manual pdf 37 page image

CHAPTER 3 REPAIR PROCEDURESEB Series Scales Service Manual 3-13 Ohaus Corporation www.ohaus.com3.5.1 Overload Protection Stop Adjustment continued3. Add the mass specified in Table 3-2. The mass should be placed on the center of thePan. With the specified mass on the Pan, all of the overload (down) stops should hitthe bottom Load Cell Frame.4. Tighten the nut on the down stop screws so they will not move and recheck.TABLE 3-2. LOAD CELL OVERLOAD PROTECTION STOP GAP SETTINGS.SCALE CAPACITY OVERLOAD GAP SETTING MASS3 kg6 kg15 kg30 kg0.6mm0.8mm1.0mm1.6mm24.5kg292.kg22.5kg45.5kg5. Reassemble the scale.6. Calibrate the scale using Appendix B instructions. Check all operations.