OHAUS RANGER 4000 Series Instruction Manual

Also see for RANGER 4000 Series: Instruction manual User guide Instruction manual Instruction manual User guide

Contents

Ranger™ 4000 Series EN 104. Manually reset the countdown timer by pressing the Function key. [rEAdY] (Ready) willthen be displayed.Note: If Set0 has been selected, the countdown timer is not displayed. The first weight largerthan 5d will be displayed and held.Semi-automatic operation (DYNAMIC is set to SEMI in the Mode menu):1. Press and hold Mode until [dYNAmM] (Dynamic) is displayed. [rEAdY] (Ready) will thenbe displayed.2. Place the load on the pan to start measurement.During the average period, the countdown timer decreases in one second increments.3. After completed countdown, the average weight will be displayed. The tilde symbol willblink indicating that the current weight is being held.4. Manually reset the countdown timer by pressing the Function key. [rEAdY] (Ready) willthen be displayed.Note: If Set0 has been selected, the countdown timer is not displayed. The first weight largerthan 5d will be displayed and held.Automatic operation (DYNAMIC is set to AUTOMATIC in the Mode menu):1. Press and hold Mode until [dYNAmM] (Dynamic) is displayed. [rEAdY] (Ready) will thenbe displayed.2. Place the load on the pan to start measurement.During the average period, the countdown timer decreases in one second increments.3. After completed countdown, the average weight will be displayed. The tilde symbol willblink indicating that the current weight is being held.4. Remove the load and the display will reset after 10 seconds, [rEAdY] (Ready) will then bedisplayed.Notes: If Set0 has been selected, the countdown timer is not displayed. The first weight largerthan 5d will be displayed and held.Alternatively, the display may be manually reset by pressing the Function key.3.8 Accumulation and StatisticsThe Accumulation feature enables manual or automatic totalizing of displayed values. Statisticaldata is stored in memory for review and printing. Accumulation works together with eachapplication mode except Dynamic.3.8.1 Accumulating Displayed ValuesWith ACCUMULATE set to MANUAL, place the item on the scale and press the M+ key to addthe weight to accumulation data. The ∑ icon will keep flashing until the weight is removed.With ACCUMULATE set to AUTO, place the item on the scale. The displayed value isaccumulated automatically. The ∑ icon will keep flashing until the weight is removed.3.8.2 Viewing and Clearing Statistical DataWhen the pan is cleared, press the M+ key todisplay the statistical information. To clear the accumulation data press the Tare key while thestatistical information is displayed. The display shows [Clr.aCC]. Press the Yes key to clear thestored data and return to current mode.