OHAUS RANGER 4000 Series Instruction Manual

Also see for RANGER 4000 Series: Instruction manual User guide Instruction manual Instruction manual User guide

Contents

EN 21 Ranger™ 4000 SeriesFormatSet the printing format.MULTI = a multi-line (single column style) printout is generated.SINGLE = a single line printout is generated.FeedSet the paper feed.LINE = move a paper up one line after printing4LF = move a paper up four lines after printingFORM = a form feed is appended to the printoutData Transfer [data.tr]Output weighing results directly to a PC application.OFF = disabledON = enabledWindows XP Setup:1. Click Start Menu in Windows XP and click Settings -> open Control Panel.2. Double click Accessibility Options in Control Panel.3. Select the General tab.4. Check Use Serial Keys, and click the Settings button.5. Select the Serial Port, set the Baud rate to 9600 and click OK.6. Close the Control Panel.7. Run Excel to open one blank sheet. Focus the cursor on one item. At this time, if scalesends data to the PC through the RS232 port, the data will be put into the cell, and thecursor will automatically move to the next vertical cell.Notes:For Windows 7 setup, contact Ohaus.If the weighing value is a negative number, set the target cell in TEXT format. Otherwise, Excelwill not distinguish it as a negative number.Please do not use this function during continuous printing.End Print [End]Advance to the next menu or return to the top of the current menu.4.8 COM1 MenuEnter this menu to define communication parameters.Note: The COM2 menu is only displayed if a second interface is installed.Reset [reset]Reset the COM menu to factory defaults.NO = no resetYES = resetReset: no, yesBaud Rate: 300…9600…19200Parity: 7 even, 7 odd, 7 none, 8 noneStop bit: 1, 2Handshake: none, On-OffAlternate command: Print (A…P…Z), Tare (A…T…Z), Zero (A…Z)End COM: Exit menu