OHAUS Ranger Operating Instructions Manual

Also see for Ranger: Quick start guide Service manual Operating instructions Instruction manual Instruction manual

1 3In this section, you will learn how to work with the menu. The menu allows you to match your scale to yourspecific weighing needs. In the menu, you can change the settings of your scale and activate functions. TheMain Menu contains 7 sub menus. Each of the seven sub menus are described in detail in the followingsections.3.3 Menu operation3.2 Switch functionsThe button switches located on the front panel of the scale provide several functions. Please read the followinginformation before pressing any of these buttons.ON/ZEROOFFG/N/TMENU TAREPRINTUNITSBUTTONS PRIMARY FUNCTION SECONDARY FUNCTIONON/ZERO Short press - Turns scale ON if OFF. When scale is ON, short press zeros the scale.OFF Long press - Turns scale OFF if ON.PRINT Short press - Sends PRINT command. When in MENU MODE: short press = NO.UNITS Long press - Changes UNITS.G/N/T Short presses - Gross/Net/Tare. When in MENU MODE: short press = YES.MENU No action for 5 secs., scale returns NET.Long press - Enter MENU.TARE Short press - enter TARE.How to enter the menusTo enter the menus, press and hold the G/N/T MENU button until CALappears. This is the first menu, CALIBRATION.G/N/TMENU (Long press)CALIBRATION SETUP READ RS232-1 RS232-2 LOCKOUT QUITA short press on the PRINT UNITS button = NO. When in MENU MODEshort presses will advance to the next menu as shown below. WhenQUIT is reached, the next press on the PRINT UNITS button will return tothe CALIBRATION menu.(Short press= NO)How to select a specific menuPRINTUNITSAll manuals and user guides at all-guides.com