Ohaus Corporation19A Chapin Road,P.O. Box 2033Pine Brook, NJ 07058-2033, USATel: (973) 377-9000,Fax: (973) 593-0359www.ohaus.comWith offices worldwide.P/N 21203633A © Ohaus Corporation 2000, 2001 all rights reserved.All manuals and user guides at all-guides.com

OHAUS Ranger Operating Instructions Manual

safety precautions

menu navigation

Ranger

Overview of Ranger Counting Scale Controls

Overview of Ranger Weighing Scale Controls

Introduction

Tools and Test Equipment Required

Specifications

Ranger Weighing NTEP Version Specifications

Ranger Weighing OIML Version Specifications

Diagnostic Guide (Table)

Diagnostic Guide

Error Codes

Preventive Maintenance Checklist

Menu Structure

Ranger Weighing Scale Menus

Ranger Counting Switch Functions

Ranger Counting Scale Menu Operation

How to Enter an Individual Menu Item

Setup Menu

Read Menu

RS232-1/RS232-2 Menus

Lockout Menu

Quit menu

How to Enter an Individual Menu

Calibration and Sealing

Unlocking the Menus

Weights and Measures Sealing

Performance Tests

Off-Center Load Test

RS232 Interface Test

Print Test

Repair Procedures

Replacing the Internal Rechargeable battery

Replacing the Analog PCB

Replacing the Display Mounting Plate

Final Reassembly

Accessing and Using Service Mode

Accessing Service Mode

Working in Service Mode

Data for Noncertifiable Ranger Scales

Overview of Weighing Cells and Preloads

Geographical Adjustment Values

Top Components, High Capacity Scale (Strain Gauge) Shown

Switch Actuators, High Capacity Scale (Strain Gauge) Shown

Bottom Components, High Capacity Scale (Strain Gauge) Shown

Power Pack, High Capacity Scale Shown

Weigh Display

Top Components, Low Capacity Scale (Strain Gauge) Shown

Switch Actuators, Low Capacity Scale Shown

Bottom Components, Low Capacity Scale (Strain Gauge) Shown

Power Pack, Low Capacity Scale Shown

Miscellaneous Parts

OVERVIEW OF CONTROLS

INTRODUCTION

Safety considerations

Locating and leveling the scale

Battery operation

Connecting a second scale for piece counting

OPERATION

Switch functions

Menu operation

Turning on the scale and zeroing

Weighing with tare

Unit switch operation

Counting pieces out of a container

Piece counting with 2-scale systems

SETTING UP YOUR SCALE

Read menu

RS232-1 / RS232-2 menus

Lockout menu

CALIBRATION AND SEALING

Calibration

Weights and measures sealing

CARE AND MAINTENANCE

RS232 Interface

Error codes list