OHAUS STARTER 3100C Instruction Manual

Also see for STARTER 3100C: Instruction manual Service manual Service manual Instruction manual

Contents

EN-2 STARTER 3100C Bench Conductivity Meter1.2 Safety PrecautionsCAUTION: Read all safety warnings before installing, making connections, or servicing thisequipment. Failure to comply with these warnings could result in personal injury and/or propertydamage. Retain all instructions for future reference. Verify that the input voltage range printed on the data label and the plug type matches thelocal AC power to be used. Make sure that the power cord does not pose a potential obstacle or tripping hazard. Use the equipment only in dry locations. Dry off any liquid spills immediately. The instrument is not watertight. When using chemicals and solvents, comply with the instructions of the chemical producerand the general lab safety rules. Use only approved accessories and peripherals. Operate the equipment only under ambient conditions specified in these instructions. Disconnect the equipment from the power supply when cleaning. Do not operate the equipment in hazardous or unstable environments. Service should only be performed by authorized personnel.