OHAUS Scout Instruction Manual

Also see for SCOUT: Service manual Instruction manual Instruction manual Instruction manual Instruction manual

Contents

OHAUS Scout Instruction Manual Manual pdf 4 page image

EN-2 Ethernet InterfaceSETUP DEFINITIONSMenu Settings ExplanationPRINT / A. Print – Off Only sends data when PRINT is pressed.PRINT / A.Print / On.Stable – Load,Load.ZeroBalance only transmits stable data.Load: Print stable value excluding zeroLoad.Zero: Print stable value including zeroPRINT / A.Print / interval - (xx) sec Balance sends data every (xx) seconds.PRINT / Auto Print – accept Balance only sends stable accept data in Checkmode.PRINT / A.Print – Continuous Balance repeatedly sends data as fast aspossible.PRINT / ContentOn: print relevant content after weighing dataGross – on: G; Net – on: N; Tare – on: T;Info – on: balance will print application modesetting parametersPRINT / Layout / Format - (Single,Multi)Single: print all data in one lineMulti: print all data in multiple linesPRINT / Layout / Feed - (Line, 4Lines, Form)Line: feed one line after printing4 Lines: feed four lines after printingForm: feed one page after printing (move to thetop of next page after printing)Ethrnt / IP AdrDisplays the balance's IP AddressUse the “No” and “Back” keys to show the entirenumber on the displayEthernet ConnectionThe Interface has a preset IP Address. The Port Number is always 9761 andcannot be changed. For more Ethernet configuration, please refer to the SectionEthernet Configuration.For STX Balances:Upon installation, the STX balance will show the Ethernet icon ( ) in the upperright corner.Menu added FunctionCommunication|--Ethernet|--Ethernet Settings|--Print Settings For more info, please refer to the STX instructionmanual.