OHAUS Scout SJX Quick Start Manual

Also see for Scout SJX: Quick start guide

Contents

ScoutTM SJX Balances Quick Start GuideScoutTM SJX Balances ii Corporation www.ohaus.comStep-3 Connect PowerConnect the AC Adapter to the balanceinput jack.Battery InstallationInstall the Four “AA” (LR6) batteries(not included) with polarity as shown inthe battery compartment.Step-4 Level the balanceLevel the balance before using byadjusting the feet until the air bubble iscenteredSAFETY PRECAUTIONSCAUTION: Read all safety warnings before installing, making connections, orservicing this equipment. Failure to comply with these warnings could result inpersonal injury and/or property damage. Retain all instructions for future reference. Verify that the local AC power supply voltage is within the input voltagerange printed on the AC adapter’s ratings label. Only connect the AC adapter to a compatible grounded socket. Position the instrument such that the AC adapter can be easilydisconnected from the socket. Position the power cord so that it does not pose a potential obstacle ortripping hazard. Operate the equipment only under ambient conditions specified in the userinstructions. Do not operate the equipment in hazardous or explosive environments. Disconnect the equipment from mains power before cleaning or servicing. Service should only be performed by authorized personnel.AC Adapter Jack BatteryCompartmentVisit www.scaleman.com to purchase Ohaus Scout SJX ScaleVisit www.balances.com for balances, scales & calibration weights