OHAUS Valor 2000 Series Instruction Manual

Also see for CS 2000: User guide Instruction manual Operating manual Operating manual Operating manual

Contents

EN-8 Valor 2000 Series ScalesThe display flashes the full calibration point. Place thespecified weight on the scale and press the Yes button.The display shows --C-- while the full calibration point isestablished.If linearity calibration was successful, dONE is displayedand the scale exits to the active weighing mode anddisplays the actual weight value.4.3 RES MenuRESOLUTIONSet the resolution to LO (low) or HI (high).4.4 UNIT MenuKILOGRAM UNITSet kilograms ON or OFF. When kg is lit, press the Yesbutton to access the ON or OFF setting, then press No tochoose ON or OFF, then Yes to accept the setting.GRAM UNITSet grams ON or OFF. When g is lit, press the Yes buttonto access the ON or OFF setting, then press No to chooseON or OFF, then Yes to accept the setting.POUND UNITSet pounds ON or OFF. When lb is lit, press the Yesbutton to access the ON or OFF setting, then press No tochoose ON or OFF, then Yes to accept the setting.OUNCE UNITSet ounces ON or OFF. When oz is lit, press the Yesbutton to access the ON or OFF setting, then press No tochoose ON or OFF, then Yes to accept the setting.