OHAUS Valor 2000 Series Instruction Manual

Also see for CS 2000: User guide Instruction manual Operating manual Operating manual Operating manual

Contents

EN-4 Valor 2000 Series Scales2.4.2 Battery PowerThe scale can be operated on the internal rechargeable battery when AC power is notavailable. The scale will automatically switch to battery operation if there is a powerfailure or the power cord is removed.Before using the scale for the first time, the battery should be fullycharged for up to 12 hours. During charging, the battery Indicatordisplays the charge level (see Table 2-1), and the scale can be operatedduring charging. The battery is protected against over charging and thescale can remain connected to the AC power line.TABLE 2-1. BATTERY CHARGE STATUS.Charge Status Indication Light Charge levelOff Fully ChargedFlashing Green 70 – 100 %Flashing Yellow 40 – 70 %Flashing Red 0 – 40 %The scale can operate for approximately 60 hours on a fully charged battery.During battery operation, the battery Indicator displays the battery status (see Table2-2).TABLE 2-2. BATTERY CAPACITY STATUS.Charge Status Indication Light Capacity RemainingSolid Green 70 – 100 %Solid Yellow 40 – 70 %Solid Red 10 – 40 %Flashing Red 0 – 10 %Flashing Red, Lo bAt Requires recharge;Accuracy not guaranteedNOTE:• Charging the scale must only be performed in a dry environment.• Install the rubber seal securely to ensure the scale is protected whenoperating in a wet environment.CAUTION: Battery is to be replaced only by an authorized Ohaus servicedealer.Risk of explosion can occur if replaced with the wrong type or connectedimproperly.Dispose of the lead acid battery according to local laws and regulations.