Objet Alaris Preparation And Installation Manual
                    | |
Contents
| 
Alaris Site Preparation GuideObjet Confidential and Proprietary InformationDOC-04002 13 Rev. C5 Facility Requirements5.1 Electrical Power Requirements5.1.1 Power RequirementsAlaris printers have the following power rating:A Type C circuit breaker with the following specification is recommendedon the printer’s power line, subject to the local electrical code.The Alaris 3‐D printing system requires a stable and uninterruptedpower supply. The power to the system should be supplied directly fromthe main electrical panel, without any tapped feeds on the line.5.1.2 GroundingThe Alaris printer is grounded through the single‐phase AC plug. Makesure that the ground connection in the wall outlet is properly grounded, inaccordance with the local electrical safety codes.5.1.3 Main Power ConnectorsThe Alaris system is shipped without a power cable. The power cable issupplied by the local Objet dealer.Voltage Current100–120 VAC single-phase, 50–60 Hz 7 A200–240 VAC single-phase, 50–60 Hz 3.5 ATable 3: Printer power ratingVoltage Circuit Breaker100–120 VAC 10 A200–240 VAC 6 ATable 4: Circuit breaker requirements |
Related manuals for Objet Alaris
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine