Océ 3121 – Copying Manual – English7-3How to Setup and Disconnect the FilmProjectorHow to Set up the Film ProjectorBefore using the Film Projector, remove any tape used for securing parts on the Film Projector.Referring to the figure on the previous page, make sure that you have all the parts.1 Place the Film Projector on the platen glass.Place the Film Projector on the platen glass makingsure that it faces the direction shown in the figure onthe right. Align the two lugs on the bottom of the FilmProjector with the two holes at the front of the platenglass.2 Plug in the power cord.Plug the power cord into the power cord connectorlocated on the projector’s left panel. Plug the otherend of the power cord into a power socket.3 Set the lamp housing upright.Set the lamp housing upright while supporting it fromits bottom. When the lamp housing is fully upright,you will hear it click into place.Lamp housing12345678910
