10 Chapter 1 Introduction to the Booklet makerThe Rear Panel of the Booklet makerThe Rear Panel of the Booklet makerIllustration[3][3] The Rear Panel of the Booklet makerComponent - function table[3]BCEDFA[3] The Rear Panel of the Booklet makerComponent FunctionA Rating and seriallabelThe rating label displays the type of machine, serialnumber, power use, and fuse information.B Power ON/OFFswitchThe power ON/OFF switch turns the Bookletmaker ON or OFF. When you turn OFF the Bookletmaker, the current settings are stored.C Voltage advisorylabelThe voltage advisory label tells the installer to referto the installation instructions before the Bookletmaker is connected to the electrical power supply.The Booklet maker can be adjusted for one ofseveral different input voltages.D Fuses The fuses make sure the operator and the machineare protected if there is an electrical problem orshort circuit.E Voltage label The voltage label is fitted to the Booklet makerduring the installation procedure. The voltage labeldisplays the selected voltage.F Power inputconnectorThe power input connector is used to connect theBooklet maker to the electrical power supply.
