18 Chapter 2 How to run the Booklet makerRun the JobRun the Job1. Make sure the adjustments on the Booklet maker are complete before you release theprint job from the print queue.2. Start the print job. The Booklet maker starts automatically.3. Check the quality of the first book.4. If the quality is not acceptable, make adjustments (see ‘Book Quality’ on page 63).ResultDuring the job■ Unload books from the stacker before the stacker is full. The Booklet maker stopsand displays a message if the stacker is full.■ Empty the trim bin from time to time. The Booklet maker displays a message ifthe trim bin is full (see ‘Empty the Trim Bin’ on page 43).
