Oce CS 4040 Installation Manual

Scanner operation 23Inserting a documentYou can insert a document into the scanner right or center-aligned, usingmeasurements in inches, millimeters, or scanner units. You make these settingsin the Océ Scan software.Insertion slot A ruler at the top of the insertion slot give the width of a right-aligneddocument. You can slide out this ruler to switch to or from millimeters andinches. Markers at the bottom of the insertion slot help you center-align standard sizedocuments for scanning.Note: It is preferable to center-align a document to position itsymmetrically on the feed rollers during a scan. You can also measure a document in scanner units.Scanner units Media size Document width1.4 Minimum (A5) 6.0" 152 mm2 A-Size (letter) and near A4 8.5" 216 mm2.6 B-Size (11") 11.0" 280 mm2.8 A3 (297 mm) 11.9" 302 mm3 Near A3 and near B-Size 12.7" 323 mm3.9 A2 (420 mm) 16.5" 420 mm4 C-Size and near A2 17.0" 430 mm5.2 D-Size (22") 22.0" 560 mm5.5 A1 (595 mm) 23.3" 592 mm6 Near A1 and near D-Size 25.4" 646 mm7.8 A0 Portrait (841 mm) 33.1" 840 mm8 E-Size and near A0 34.0" 862 mm11.2 E-Size Landscape 44.0” 1118 mm11 A0 Landscape 46.8” 1189 mm11.8 Maximum scan width 50.0" 1270 mmMaximum media size handled 51.5" 1310 mm