CS655 Pro 4-9Utility screen outlines 44.2 Function list of user settingSetting Item/Description Default01 System Setting01 Language SettingSelect the language used in the LCD.English / German / French /Italian/ SpanishEnglish02 Unit SettingSelect the unit of measurement for the value to be entered by user and tobe displayed on the touch panel.mm/ inch (decimal point)/ inch (Fraction)mm03 Feed Tray Setting01 Paper SettingRegister paper settings, or modify or delete registered settings.Paper Type/ Name/ Weight/ Both Sides Adj./ Process Adj./ SpeedSetting/ Hole-Punch/ Colored Paper/ Air Assist/ link size Informa-tion02 Feed Tray Auto SelectionSelect ATS for each tray and the priority of the detection when ATSfunctions.ATS/APS Switch (Trays 1 to 3): Off, Tray Priority: (Tray 3/ Tray/1Tray2/ Bypass Tray)Priority: (Tray 3/ Tray/1 Tray2)03 ATS Permit SettingSet ATS on or off.on/ offoff04 Auto Paper TypeSet the paper type to be selected when ATS functions.Paper Type (Plain/High Quality Paper/Color Specific)/Weigh (64-74,75-80, 81-105g/m 2)/ Hole-Punch (Prohibition)/ Tab Paper (Prohibi-tion)/ Color Paper (Prohibition)Paper Type (Plain/High Quality Pa-per/Color Specific) /Weigh (64-74,75-80, 81-105g/m 2 )/ Hole-Punch(Prohibition)/ Tab Paper (Prohibi-tion)/ Color Paper (Prohibition)05 Dehumidification FanSpecify the paper type which is to be selected in the ATS function.Dryness preparation: on/offFan Heater Control (Tray4): Automatic/ On (compulsory)/ Off (com-pulsory)Fan Heater Control (Tray5): Automatic/ On (compulsory)/ Off (com-pulsory)Dryness preparation: OnFan Heater Control(Tray4): Auto-maticFan Heater Control (Tray5): Auto-matic04 Reset Setting01 Auto Reset SettingSet the reset interval starting from the completion of a copying jobuntil the machine returns to the initial condition, without selectingany key on the touch panel or the control panel.Off/ 60 seconds/ 120 seconds/ 180 seconds/ 240 seconds/ 300seconds/ 360 seconds/ 420 seconds/ 480 seconds/ 540 seconds60 seconds02 Mode Reset SettingSelect whether or not to initialize the setting currently specifiedwhen the machine takes it that the user has changed, or originaldocument is loaded into the ADF. And select the settings to be ini-tialized each time a single job has been completed.Change user/ ADF original direction/ Reset button function/ Modememory auto call/ Finisher Mode by Full-auto/ Initial by Key Coun-ter Insert/ Status Hold When Auto Reset/ Next Job Staple Setting/Original Set/Bind DirectionChange user: YesADF original direction: Not resetReset button function: Full autoMode memory auto call: OffFinisher Mode by Full-auto: NonecollateInitial by Key Counter Insert: OffStatus Hold When Auto Reset: NotkeepNext Job Staple Setting: Do NotReleaseOriginal Set/Bind Direction: Re-lease05 Default Screen SettingSelect the initial screen to be displayed when the power switch is turnedon.Machine/ Job List/ CopyMachine06 Preset Zoom SettingModify predefined fixed ratios, and preset frequently used magnificationratios.Fixed/Six typePreset Zoom/Three typeFixed/Six typePreset Zoom/Three type
