Oce Saddle Finisher-AF2 User Manual
                                                             | |
Contents
| 
Clear a paper jam in the top cover of the stacker/staplerIntroductionIf a paper jam occurs in the top cover of the stacker/stapler (Finisher-AF1/Saddle Finisher-AF2), the operator panel will display the location of the paper jam and the procedure toclear the paper jam. Follow the instructions on the operator panel to clear the paper jam.The procedure below describes how to clear a paper jam in the top cover of the stacker/sta-pler.Warning:When you remove jammed originals or paper, take care not to cut your hands on theedges of the originals or paper.Warning:When you remove jammed originals or paper, take care not to cut your hands on theinside of the machine. If you cannot remove the paper, contact Service or your local au-thorized dealer.Warning:Be careful when you handle optional units that are attached to the machine. When youopen the door or cover of an optional unit to replace a staple cartridge, discard the punchwaste, or clear paper jams or staple jams, prints may still be output if other optional unitsare operating normally, and are not involved in the paper or staple jam removal procedure.Note:If the inserter (Document Insertion Unit-F1) is attached to the stacker/stapler, the partof the inserter may interfere with the stacker/stapler when you clear jams. Lift up theinserter before you clear jams in the stacker/stapler.Chapter 4 - Troubleshooting 35Clear a paper jam in the top cover of the stacker/stapler |
Related manuals for Oce Finisher AF1
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine