Oce Saddle Finisher-AF2 User Manual

Oce Saddle Finisher-AF2 User Manual Manual pdf 52 page image

Clear a staple jam in the saddle stitch unitIntroductionNote:This procedure is only required when the optional Saddle Finisher-AF2 is installed.If a staple jam occurs in the saddle stitch unit of the stacker/stapler (Saddle Finisher-AF2),the operator panel will display the location of the staple jam and a procedure to clear thestaple jam. Follow the procedure on the operator panel to clear the staple jam. The pro-cedure below describes how to clear a staple jam in the saddle stitch unit of the stacker/sta-pler.Before you beginFirst remove all output sheets from the booklet tray.Warning:Be careful when you handle optional units that are attached to the machine. When youopen the door or cover of an optional unit to replace a staple cartridge, discard the punchwaste, or clear paper jams or staple jams, prints may still be output if other optional unitsare operating normally, and are not involved in the paper or staple jam removal procedure.Note:If a paper jam occurs at the same time as a staple jam, first remove the jammed paper,then remove the jammed staples.How to clear a staple jam in the saddle stitch unitClear a staple jam#IllustrationActionStepOpen the front door of the stack-er/stapler.1Chapter 4 - Troubleshooting52Clear a staple jam in the saddle stitch unit