Use the Océ TDS100 33Check the copy quality with a test stripIntroductionBefore you start your copy job, you can check the result of your settings on thecopy quality with a test strip.Attention: If the original contains a filing strip, make sure that the filingstrip is at the trailing edge (see ‘Adjust leading and trailing strips’ onpage 29).How to make a test strip1. Place the original centrally and face down on the original feed table.The Océ TDS100 moves the original to the back.[12] Feed the original centrally and face down[12] Feed the original centrally and face down2. Press the 'Cut' key to select 'Standard'3. Press the upper side of the adjustment keyThe text 'TEST' appears on the display.4. Press the green start button to copy a strip.ResultThe Océ TDS100 copies only a strip of the original.
