VL3622/VL4222/VL5022 2-31Setup items by operation 22.9 Sending scan data by E-mail% Specify settings for sending scan data by E-mail.Scan data can be sent to a specified E-mail address as an attached file of the message.If the SMTP server supports SMTP over SSL or STARTTLS, setting is recommended. Becausecommunication can be encrypted by SSL/TLS, the machine can communicate securely with the server.If the SMTP server requires SMTP authentication, the SMTP authentication setting must be specified.If the SMTP server requires POP before SMTP authentication, the POP before SMTP authentication settingmust be specified. In addition, if the POP server supports POP over SSL or APOP authentication, settings forthese can be specified.Specify the settings according to the following flowchart.TCP/IP SettingsE-mail TX (SMTP)Communicate with the SMTPserver using SSL/TLS? SMTP Authentication? POP before SMTP?Yes Yes YesYesNo No NoNoSMTP over SSL/Start TLS SMTP Authentication POP before SMTP(1) POP over SSL?(2) APOP(1) POP over SSL(2) APOP AuthenticationFinish
