VL3622/VL4222/VL5022 2-37Setup items by operation 22.9.4 SMTP Authentication1 In Administrator mode of Web Connection, select the Network tab.2 Select "E-mail Setting".3 Select "E-mail TX (SMTP)".4 Specify the following settings.!DetailA SMTP authentication method that is supported by the SMTP server and provided with the strongestencryption strength is automatically selected from Digest-MD5, CRAM-MD5, PLAIN, and LOGIN.If there is just one domain (realm) to which the user belongs, it is notified from the SMTP server at thetime of initial communication, and communication is automatically made using the domain name.Therefore, no domain name setting on this machine is not required. If there are two domains or moreto which the user belongs, however, specify the domain name to which the user belongs.Item Definition Prior confirmationSMTP Authentication To perform SMTP authentication, select the "SMTP Au-thentication" check box.Whether the sever re-quests SMTPUser ID Specify the user ID for the SMTP authentication (up to255 characters).Password Specify the password for the SMTP authentication (up to128 characters).Domain Name Specify the domain name for the SMTP authentication(up to 255 characters).If the authentication method is Digest-MD5, the domainname must be specified.Authentication methodAuthentication Settings Specify whether to synchronize with user authentication.When user authentication is performed, this item is dis-played.Whether to synchronizethe user authentication
