VarioLink 5022/VarioLink 4222/VarioLink 3622 1-19Before use 11.6.4 Selecting the position of the binding margin (OriginalBinding Position/Binding Position settings)If a double-sided original is loaded into the ADF, specify the position of the topof the back side of the original by specifying the binding margin position forthe original.1 Position the original to be copied.– For details on positioning the original, refer to "Feeding the original" onpage 1-11.2 In the Basic screen, touch [Duplex/Combine]. Otherwise touch theOriginal Settings tab.Setting DescriptionLeft Select this setting if the original is loaded with the binding margin at the left.Top Select this setting if the original that is loaded has a binding margin at thetop.Right Select this setting if the original is loaded with the binding margin at theright.Auto With this setting, the binding margin is set at the top or at the left.Select this setting to automatically select the position of the binding margin.If the original length is 11-11/16 inch (297 mm) or less, a binding positionalong the long side of the original is selected.If the original length is more than 11-11/16 inch (297 mm), a binding positionalong the short side of the original is selected.
